ROI Calculator (Return on Investment)
Enter what you put in, what it is worth now, and how long you held it. Get the total ROI, the annualized ROI, and the money multiple in one pass.
Return on investment (ROI) compares the profit of an investment with the money it took to make it: ROI = (Final − Initial) ÷ Initial × 100%. On the default inputs, $10,000 growing to $15,000 over 3 years is a net gain of $5,000.00, a total ROI of 50.00%, and an annualized ROI of 14.47% per year (a 1.50× money multiple). ROI is time-blind by itself: the same 50.00% earned over 10 years annualizes to only 4.14%, so a comparison that ignores the holding period flatters slow investments and penalizes fast ones.
ROI Formulas
- Net gain:
G = FV − PV, wherePVis the initial investment andFVis the final value. - Total ROI:
ROI = (FV − PV) ÷ PV × 100%. A $10,000 stake that ends at $15,000 returns(15,000 − 10,000) ÷ 10,000 = 50.00%. - Annualized ROI:
ROIyear = (FV ÷ PV)1 ÷ t − 1, wheretis the holding period in years. This is the constant yearly rate that compounds the same endpoints. - Money multiple:
FV ÷ PV— how many times the original stake the ending value represents (1.50× here). - Real (after-inflation) annualized ROI:
((FV ÷ PV)1 ÷ t ÷ (1 + i)) − 1, withithe annual inflation rate. At 2.5% inflation, the 14.47% nominal annualized ROI is 11.68% in purchasing power.
What ROI measures — and what it leaves out
ROI is deliberately blunt: one number that answers "how much did I make relative to what I put in?" It is the first metric anyone quotes, because it needs only two observations — the money in and the money out — and it works for a stock position, a rental property, a marketing campaign, or a small business.
Its simplicity is also its limit. The formula contains no time, no risk, and no path. A 50.00% ROI earned in one year and a 50.00% ROI earned over ten years are the same number to the ROI formula, even though the first compounds at 50.00% a year and the second at 4.14%. It also says nothing about whether the money was at risk along the way, whether cash came out early, or whether fees and taxes already came off the top — all of which change the decision.
That is why this page reports the annualized ROI next to the total. The total answers "how much", the annualized rate answers "how fast", and both together are the minimum needed to compare two investments honestly.
ROI vs. annualized ROI vs. CAGR vs. IRR
Four metrics show up in the same conversations, and they are not interchangeable:
| Metric | Formula | Question it answers | Blind to |
|---|---|---|---|
| Total ROI | (FV − PV) ÷ PV |
How much did I make overall? | Time, risk, path |
| Annualized ROI | (FV ÷ PV)1 ÷ t − 1 |
What constant yearly rate compounds these endpoints? | Intermediate cash flows, volatility |
| CAGR | (End ÷ Begin)1 ÷ years − 1 |
Same rate, under its standard name outside portfolios | Intermediate cash flows, volatility |
| IRR | Σ CFt ÷ (1 + IRR)t = 0 |
What rate makes a dated cash-flow stream break even? | Reinvestment at IRR, multiple sign changes |
| Money multiple | FV ÷ PV |
How many times my money did I end with? | Time, size of the stake |
The annualized ROI and CAGR are the same calculation for the same situation — one lump sum in, one value out — and this page uses the names interchangeably. IRR only diverges once money moves in between: invest $10,000 and collect $5,000 at the end of each of the next three years, and the total ROI is still 50.00% while the IRR is 23.38%, because $10,000 of that $15,000 came back earlier than year three. The annualized ROI of the same deal — 14.47% — describes the endpoints only and cannot see the early repayments.
The time-blindness problem: 50% is not 50%
Holding the total ROI fixed makes the point cleanly. A 50.00% total return annualizes to very different rates depending on how long the money was tied up:
| Holding Period | Total ROI | Annualized ROI | Money Multiple |
|---|---|---|---|
| 1 year | 50.00% | 50.00% | 1.50× |
| 2 years | 50.00% | 22.47% | 1.50× |
| 3 years | 50.00% | 14.47% | 1.50× |
| 5 years | 50.00% | 8.45% | 1.50× |
| 10 years | 50.00% | 4.14% | 1.50× |
The money multiple never moves — 1.50× either way — but the yearly rate collapses from 50.00% to 4.14% as the holding period stretches from one year to ten. Comparing a 50.00% three-year return with a 40.00% one-year return by total ROI alone would recommend the wrong investment: the one-year deal compounds at 40.00% a year, the three-year deal at 14.47%.
Worked examples
Example 1: $10,000 grows to $15,000 over 3 years (default)
You invest $10,000 in a diversified fund and it is worth $15,000 three years later, with all distributions reinvested. Enter Initial Investment = 10000, Final Value = 15000, and Holding Period = 3:
- Net gain:
$15,000.00 − $10,000.00 = $5,000.00 - Total ROI:
$5,000.00 ÷ $10,000.00 = 50.00% - Annualized ROI:
(1.50)1 ÷ 3 − 1 = 14.47%per year - Money multiple:
$15,000.00 ÷ $10,000.00 = 1.50×
The check is direct: $10,000 × 1.14473 = $15,000.00. Any annualized rate you report should reproduce the endpoints when compounded — if it does not, it is not the annualized ROI.
Example 2: the same 50% spread over 10 years
The same $10,000 → $15,000 result, but the money was committed for a decade instead of three years. Only the holding period changes:
- Total ROI: unchanged at 50.00% (net gain $5,000.00)
- Annualized ROI:
(1.50)1 ÷ 10 − 1 = 4.14%per year - The gap: 14.47% versus 4.14% is the entire cost of earning the same total return three times slower — a difference of 10.33 percentage points a year.
At 4.14% a year, a $10,000 stake doubles in about 17.1 years (ln 2 ÷ ln 1.0414); at 14.47% it doubles in about 5.1 years. Total ROI cannot distinguish the two.
Example 3: a loss — $20,000 down to $16,000 in 2 years
ROI handles losses with the same formula, and the annualized rate is where the arithmetic bites. Enter Initial Investment = 20000, Final Value = 16000, Holding Period = 2:
- Net gain:
$16,000.00 − $20,000.00 = −$4,000.00 - Total ROI:
−$4,000.00 ÷ $20,000.00 = −20.00% - Annualized ROI:
(0.80)1 ÷ 2 − 1 = −10.56%per year - Recovery needed: getting back to $20,000 from $16,000 requires
($20,000 ÷ $16,000) − 1 = 25.00%, not 20.00% — the asymmetry that makes losses expensive.
Note the direction of the asymmetry: the loss compounds away at 10.56% a year for two years, but the 25.00% recovery at that same annualized pace takes about ln 1.25 ÷ ln 1.1056 = 2.22 years — longer than the loss took to happen.
Example 4: what a 50% ROI is worth after 2.5% inflation
ROI is nominal unless you deflate it. Take Example 1 and assume 2.5% annual inflation over the same three years:
- Real cumulative return:
1.50 ÷ 1.0253 − 1 = 39.29%in today's purchasing power, not 50.00%. - Real annualized ROI:
(1.501 ÷ 3 ÷ 1.025) − 1 = 11.68%per year, versus 14.47% nominal. - The erosion: 10.71 percentage points of the cumulative return belong to inflation, not to the investment.
For a longer hold the same subtraction is larger in dollar terms even at identical nominal rates, which is why retirement-horizon comparisons should use the Inflation Calculator alongside a nominal ROI.
Verify ROI in Excel or on a financial calculator
Every figure above is reproducible in a spreadsheet. With the initial value in B1, the final value in B2, and the holding period in B3:
- Total ROI:
=(B2-B1)/B1returns0.50— format as a percentage to read 50.00%. - Annualized ROI:
=(B2/B1)^(1/B3)-1returns0.1447— 14.47%. - Money multiple:
=B2/B1returns1.5— 1.50×. - IRR of a dated stream:
=IRR({-10000,5000,5000,5000})returns0.2338— 23.38%, the figure that already knows $5,000 arrived in year one. - Real annualized ROI:
=(B2/B1)^(1/B3)/1.025-1returns0.1168— 11.68% at 2.5% inflation.
On a BA II Plus or HP 10bII, the annualized ROI is the compound growth rate: PV = −10000, FV = 15000, N = 3, then CPT I/Y gives 14.47.
Related tools
- The same rate under its other name. The CAGR Calculator computes the identical endpoint rate for a beginning value, an ending value, and a number of years, with the average-return trap spelled out.
- Growth with contributions. If money goes in along the way, the single ROI number stops describing the investment; use the Compound Interest Calculator.
- Doubling time rule of thumb. The Rule of 72 Calculator turns an annualized ROI into a mental-math doubling time.
- Multi-period cash flows. When the money moves more than twice, the NPV / IRR Calculator is the right engine.
- Purchasing power. Deflate any nominal ROI with the Inflation Calculator.
- Work backwards from a target. The Savings Goal Calculator solves for the contribution a target ROI implies.
Frequently asked questions
Is annualized ROI the same thing as CAGR?
Yes, for the situation this page models: one amount invested at the start and one value observed at the end. Both compute (FV ÷ PV)1 ÷ t − 1. "CAGR" is the name used for investments and business metrics, "annualized ROI" is the name used in portfolio and project reviews, and the CAGR Calculator runs the same math from the growth side. They diverge only when cash flows in or out mid-period — then neither describes your actual return and IRR does.
Can ROI be negative, and how much gain does a loss need to recover?
Yes. A final value below the initial investment produces a negative net gain and a negative ROI, and the annualized figure stays negative as well: $20,000 falling to $16,000 over two years is −20.00% total and −10.56% annualized. Recovery is not symmetric. Returning to $20,000 from $16,000 requires a 25.00% gain, and because that gain compounds from a smaller base it takes longer than the two years the loss took at the same annualized rate. This is why a −50.00% year needs a 100.00% year to break even.
Why does IRR differ from the annualized ROI on the same investment?
Because IRR sees the timing of every cash flow and annualized ROI sees only the two endpoints. Invest $10,000, collect $5,000 at the end of each of the next three years: the total ROI is 50.00% and the annualized ROI of the endpoints is 14.47%, but the IRR is 23.38% because $5,000 came back after year one and could be redeployed. Neither number is wrong — they answer different questions. IRR assumes you can reinvest each repayment at the IRR itself, which is why it reads high for fast-payback projects.
Does ROI include dividends, fees, and taxes?
Only if you put them in the two inputs. The standard convention is to set Final Value to the total value of the position with distributions reinvested, and Initial Investment to the full cash outlay including purchase fees. On $10,000 invested with $500 of fees that ends at $15,000, the ROI is ($15,000 − $10,500) ÷ $10,500 = 42.86%, not 50.00%. For a taxable account, subtract the tax on realized gains from the final value before computing ROI if you want an after-tax figure.
What counts as a good ROI?
There is no universal threshold — the honest benchmark is what the same money could have earned at similar risk, expressed on the same annualized basis. Compare 14.47% against the annualized return of the realistic alternative (a savings yield, a bond, a broad index fund) over the same three years, and compare 4.14% the same way over ten. Adjust both for inflation if purchasing power is the goal, and treat an annualized rate that looks spectacular as a question about the risk taken rather than a conclusion: the ROI of a single position says nothing about the volatility you sat through to earn it.